Granite Cutting Machine Price List in India (Updated 2026) | SLP ENGINEERS
If you’re planning to buy a granite cutting machine in India in 2026, the price can range from a compact manual cutter for a small workshop to a fully automatic bridge saw for industrial slab production.
The important point is that “granite cutting machine” is a broad category. Machine price changes substantially depending on cutting capacity, blade size, automation, motor power, table size and application.
This guide provides a 2026 price reference based on SLP Engineers’ currently published prices, along with the specifications and factors buyers should consider before purchasing.
Price note: Online machine prices can change. GST, freight, installation, tooling and custom configurations may be additional. Treat the figures below as published/indicative prices and confirm the final quotation with SLP Engineers before ordering.
Granite Cutting Machine Price in India – 2026
SLP Engineers Price Reference
|
Machine |
Published Price |
GST |
|---|---|---|
|
Stone Cutting Machine |
₹1.50–2.20 lakh |
+18% |
|
Portable Granite Cutting Machine |
₹1.40 lakh |
+18% |
|
Trolley Type Granite Edge Cutting |
₹1.65–2.45 lakh |
+18% |
|
Stone Brick Edge Cutting Machine |
₹2.00–2.50 lakh |
+18% |
|
Two-Head Stone Round Table Cutter |
₹2.25–2.80 lakh |
+18% |
|
Stone Chokhat/Pattam Cutting Machine |
₹2.50–3.50 lakh |
+18% |
|
Granite Door Frame Polish Machine |
₹5.50–8.50 lakh |
+18% |
|
Automatic Bridge Saw |
₹14.50–22.50 lakh |
+18% |
These prices are taken from SLP Engineers’ current published product pages.
1. Stone Cutting Machine – ₹1.50–2.20 Lakh
SLP Engineers currently publishes its stone cutting machine at approximately:
₹1.50 lakh – ₹2.20 lakh + 18% GST
The listed machine has:
- Manual automation grade
- 440V supply
- 7.5–15 HP power range
- 300 mm cutting capacity
- Approximately 2.5 × 2.5 ft table
- Around 1,000 kg machine weight
SLP describes the machine for stone cutting applications including hard stones and granite.
Best suited for:
- Small stone workshops
- Granite cutting
- Marble cutting
- Small blocks
- General stone processing
2. Portable Granite Cutting Machine – ₹1.40 Lakh
SLP Engineers lists a portable granite cutting machine at approximately:
₹1.40 lakh + 18% GST
Published specifications include:
- Manual operation
- 440V
- Three-phase
- 7.5 HP Crompton motor
- 14-inch diamond blade
- Up to 50 mm cutting thickness
- 12 × 3.5 ft table
- Approx. 70 ft/hour listed capacity
It is intended for marble and granite edge-cutting applications.
Best suited for:
- Edge cutting
- Smaller fabrication operations
- Granite and marble
- Construction/fabrication work
3. Trolley Type Granite Edge Cutting Machine – ₹1.65–2.45 Lakh
SLP Engineers publishes the trolley-type granite edge cutter at:
₹1.65–2.45 lakh + 18% GST
The listed configuration includes:
- Manual operation
- 440V
- 7 × 3 ft trolley
- 16-ft rail line
This can be considered for businesses requiring a trolley-based stone cutting workflow.
4. Stone Brick Edge Cutting Machine – ₹2–2.50 Lakh
Published price:
₹2.00–2.50 lakh + 18% GST
The listed machine includes:
- 15 HP rated power
- Trolley system
- 24–36 inch blade compatibility
- Up to 350 mm cutting thickness
- Manual cutting feed
SLP lists it for stone-block cutting applications.
5. Two-Head Stone Round Table Cutting Machine – ₹2.25–2.80 Lakh
For round granite and marble table-top production, SLP Engineers lists a two-head machine at:
₹2.25–2.80 lakh + 18% GST
Published specifications include:
- Semi-automatic operation
- 10 HP power
- 5-ft round-table cutting
- Up to 50 mm thickness
- Three-phase 440V
- Approx. 800 kg machine weight
This is particularly relevant for businesses producing round stone table tops.
6. Stone Chokhat / Pattam Cutting Machine – ₹2.50–3.50 Lakh
SLP Engineers lists its stone Chokhat/Pattam cutting machine at:
₹2.50–3.50 lakh + 18% GST
Published specifications include:
- 15 HP power
- 8 × 3 ft trolley
- 100 mm cutting capacity
- 440V three-phase supply
- Approx. 1,800 kg machine weight
- Manual operation
The machine is designed for applications involving granite, marble, Kota stone and other door-frame materials.
7. Granite Door Frame Polishing Machine – ₹5.50–8.50 Lakh
Although this isn’t a primary granite cutting machine, it can be important when calculating the cost of a complete granite door-frame production setup.
SLP Engineers publishes:
₹5.50–8.50 lakh + 18% GST
for its granite door-frame polishing machines.
The range includes 6-head, 8-head and 10-head configurations.
8. Automatic Bridge Saw – ₹14.50–22.50 Lakh
For professional granite and marble slab fabrication, the major investment category is the automatic bridge saw.
SLP Engineers currently publishes:
₹14.50 lakh – ₹22.50 lakh / piece + 18% GST
for its automatic bridge-saw configuration.
This machine is designed for:
- Granite slab cutting
- Marble slab cutting
- Kota stone slab cutting
Automatic Bridge Saw: Key Specifications
The published SLP Engineers configuration includes:
Cutting
- Maximum cutter: 26 inch
- Maximum cutting depth: 200 mm
- Minimum cutter: 12 inch
- Minimum cutting depth: 45 mm
Movement
- LM guideways
- Helical rack & pinion
- Ball-screw Z movement
- Servo gearbox
Automation
- PLC control panel
- Servo drives
- Laser light
- Automatic oil lubrication
Cutting Geometry
- Head rotation: 0° / 90°
- Blade tilting: 0°–45°
Main Motor
- 20 HP
- IP65
- Maximum RPM: 3000
- VFD
Power
- AC 415V
- Three-phase
- Total listed power consumption: 22.5 HP
How Much Is the Automatic Bridge Saw After GST?
Using the published ₹14.50–22.50 lakh range:
₹14.50 lakh + 18% GST
≈ ₹17.11 lakh
₹22.50 lakh + 18% GST
≈ ₹26.55 lakh
So the invoice-level amount before freight/installation and other charges could be approximately:
₹17.11–26.55 lakh
GST treatment and input-tax-credit eligibility should be handled according to your business’s tax position.
Price Comparison by Business Type
Small Granite Workshop
Consider:
₹1.4–3.5 lakh machine range
Suitable for:
- Basic cutting
- Edge cutting
- Smaller fabrication
- Door-frame work
Growing Fabrication Business
Consider:
₹5–12 lakh+ equipment investment
Depending on the combination of:
- Cutting
- Edge processing
- Polishing
- Material handling
Professional Slab Fabricator
Consider:
₹14.50–22.50 lakh+
for an automatic bridge-saw configuration.
Advanced Granite Fabrication Factory
A more complete setup could combine:
Automatic Bridge Saw
CNC Stone Machine
Edge Processing
Polishing
Material Handling
The total investment can therefore move substantially beyond the price of the cutting machine alone.
Why Granite Machine Prices Vary So Much
Two machines can both be called “granite cutting machines” but have completely different capabilities.
Price depends on:
1. Blade Size
Larger blade capacity generally requires a more substantial machine.
2. Cutting Depth
Higher cutting capacity can require greater machine capability.
3. Motor Power
Higher-duty applications may require larger motors.
4. Automation
Manual → Semi-Automatic → Automatic → CNC.
5. Table Size
Larger slabs require larger working areas.
6. Drive System
Servo systems, gearboxes, rack-and-pinion and ball screws can affect cost.
7. Control System
PLC and digital controls add capability.
8. Material Handling
Hydraulic trolleys and lifting systems increase equipment cost.
Machine Price vs Complete Setup Cost
This is one of the most important points for buyers.
If the machine costs:
₹15 lakh
you should not assume that your granite factory setup costs ₹15 lakh.
You may also need:
- GST
- Freight
- Foundation
- Electrical installation
- Water system
- Slurry management
- Diamond blades
- Material handling
- Installation
- Workshop modifications
- Working capital
Example: Automatic Granite Cutting Setup
|
Expense |
Illustrative Budget |
|---|---|
|
Automatic bridge saw |
₹18.00 lakh |
|
GST |
₹3.24 lakh |
|
Diamond tooling |
₹1.00 lakh |
|
Electrical setup |
₹1.50 lakh |
|
Foundation |
₹1.00 lakh |
|
Water/slurry system |
₹1.00 lakh |
|
Material handling |
₹2.00 lakh |
|
Installation |
₹0.75 lakh |
|
Workshop preparation |
₹2.00 lakh |
|
Working capital |
₹8.00 lakh |
|
Illustrative Total |
₹38.49 lakh |
This is an example project budget, not an SLP Engineers quotation.
Manual vs Automatic Price
|
Feature |
Manual |
Automatic |
|---|---|---|
|
Initial cost |
Lower |
Higher |
|
Operator involvement |
Higher |
Lower |
|
Repeatability |
Operator-dependent |
Higher potential |
|
Production |
Lower–Medium |
Medium–High |
|
Maintenance |
Simpler |
More complex |
|
Best for |
Small workshops |
Growing factories |
CNC vs Automatic Bridge Saw
Don’t automatically assume CNC is the next step after buying a bridge saw.
Bridge Saw
Best for:
- Straight cuts
- Slab sizing
- Cross cuts
- Mitre cuts
- High-volume primary cutting
CNC
Best for:
- Sink cut-outs
- Hob openings
- Drilling
- Grooving
- Profiling
- Curved/custom shapes
For a countertop factory, a powerful production combination can be:
Automatic Bridge Saw + CNC
What About Used Granite Cutting Machines?
A used machine can have a lower purchase price, but evaluate:
- Machine age
- Frame condition
- Guideway wear
- Motor condition
- Electrical panel
- Servo/drive condition
- Blade alignment
- Accuracy
- Spare parts
- Service availability
A cheap used machine can become expensive if downtime and repairs are high.
What Should You Ask SLP Engineers for a Quotation?
Before purchasing, request:
Technical
- Exact model
- Blade capacity
- Cutting depth
- Motor
- Table dimensions
- Accuracy
- Repeatability
- Power requirement
Commercial
- Machine price
- GST
- Freight
- Installation
- Warranty
- Payment terms
Operational
- Recommended blade
- Spare parts
- Training
- Maintenance schedule
- Service support
Most importantly:
Request a test cut using your actual granite.
How to Calculate Granite Machine ROI
Don’t evaluate only the purchase price.
Calculate:
Additional Saleable Production
m²/month
×
Contribution per m²
=
Additional Monthly Contribution
Then subtract:
- Electricity
- Labour
- Tooling
- Maintenance
- Financing
This gives a more realistic estimate of the machine’s economic contribution.
Cost per Saleable m²
One of the best metrics for comparing machines is:
Total Machine & Production Cost ÷ Saleable m²
Include:
- Machine depreciation/finance
- Electricity
- Diamond blade
- Labour
- Maintenance
- Rework
A machine with a higher purchase price can still be economically superior if it produces significantly more saleableoutput.
2026 Granite Machine Buying Checklist
Before ordering:
Machine
☐ Blade size
☐ Cutting depth
☐ Motor power
☐ Table size
☐ Maximum slab size
☐ Machine weight
Automation
☐ Manual / semi-auto / automatic
☐ PLC
☐ Servo
☐ Laser
☐ Automatic positioning
Accuracy
☐ Positioning accuracy
☐ Repeatability
☐ Calibration
☐ Test cut
Infrastructure
☐ Three-phase power
☐ Foundation
☐ Water
☐ Drainage
☐ Slurry handling
Commercial
☐ Machine price
☐ GST
☐ Freight
☐ Installation
☐ Warranty
☐ Spare parts
☐ Service
Why Consider SLP Engineers?
SLP Engineers describes itself as a manufacturer, supplier and exporter of stone-processing machinery, established in 2013 and based in Udaipur, Rajasthan. Its published portfolio includes cutting, bridge-saw, edge-cutting, polishing and industrial equipment.
Its product range allows a business to progress from:
Basic Cutting
→
Bridge Saw
→
Automatic Cutting
→
CNC Processing
→
Edge Processing
→
Polishing
This can be useful when planning a stone-processing operation in stages.
Frequently Asked Questions
What is the price of a granite cutting machine in India in 2026?
Depending on the machine category, SLP Engineers’ currently published prices range from around ₹1.40 lakh for a portable granite cutting machine to ₹22.50 lakh for a published automatic bridge saw, before applicable GST.
What is the cheapest SLP granite cutting machine?
SLP Engineers currently lists a portable granite cutting machine at approximately ₹1.40 lakh + 18% GST.
How much does an automatic granite bridge saw cost?
The published SLP Engineers price is approximately ₹14.50–22.50 lakh + 18% GST.
What is the best granite cutting machine for a small business?
For basic cutting, a manual stone cutter or portable cutting machine may be more economical. The correct choice depends on slab size, thickness and production volume.
Is CNC required for granite cutting?
No. CNC is mainly valuable for complex fabrication such as sink cut-outs, drilling, profiling and customized shapes. A bridge saw is often more efficient for primary straight slab cutting.
Does machine price include GST?
The SLP Engineers product pages cited here display prices plus 18% GST. Confirm the current tax treatment and final invoice directly with the manufacturer.
Final Verdict
2026 SLP Engineers Granite Machine Price Range
Entry-level stone cutting:
₹1.40–3.50 lakh+
Specialized cutting / fabrication:
₹5–10 lakh+
Automatic bridge saw:
₹14.50–22.50 lakh + GST
Complete CNC + cutting + finishing factory:
₹35 lakh+ depending on configuration
The biggest mistake is comparing machines only by their purchase price.
Instead compare:
Machine Cost + Operating Cost + Production Capacity + Material Yield + Maintenance + Service
The right machine is the one that produces the most
accurate, saleable granite at the lowest sustainable cost per m².
SLP ENGINEERS
Granite & Stone Processing Machinery — Cutting, Bridge Saw, CNC, Edge Processing & Polishing.
